LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (Transmission - Removal, Replacement And Installation - 1 Of 2) >> Auxiliary Transmission, Bevel Gear And Overdrive (Ambulance; 2003-2004) >> Pinion seal bevel gear, replacing >> Removal >> Removing the propeller shaft

Removing the propeller shaft

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Propeller Shaft And Exhaust Secured Using Strap
GLL109856Courtesy of VOLVO CARS OF NORTH AMERICA.

Slacken off the support for the center bearing from the propeller shaft and body. Turn the support upside down. Let the propeller shaft rest on the support.

Press the shaft nuts together. Move the shaft to one side and tie it up.

scientia non olet · About LEMON Manuals