Removing the nuts for the bevel gear flange

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Flange Position & Nut Marked In Relation To Pinion Shaft End And Bevel Gear Flange Nuts, Tool 9995652 & Tool 9997058

Courtesy of VOLVO CARS OF NORTH AMERICA.

Mark the position of the flange and nut in relation to the pinion shaft end

Remove the nut.

Use counterhold 9995652 with adapter 9997058 .