Installing a new sealing ring
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Install the new sealing ring for the drive shaft.
Lubricate the seal with wheel bearing grease, P/N 1161241-3.
Use drift 9995654 . Tap in the ring to stop.
If also replacing the seal for the crown wheel shaft, proceed to Sealing ring for crown wheel shaft for bevel gear, replacing .
NOTE:
To install the drive shaft, see.