Draining the bevel gear oil

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Bevel Gear

Courtesy of VOLVO CARS OF NORTH AMERICA.

Position the bevel gear over a container. Remove the level plug. Allow the oil to run out through the bearing. Wipe away spilled oil from the sealing ring seat on the bevel gear. Use a lint-free rag.