Installing front end components, continued
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Install:
- the screw for the drive shaft / wheel hub. Use a new screw. Tighten. See Summary of tightening torques for specific components .
- the anti-roll bar link on the spring strut. Use a new M12 lock nut. Tighten
- the wheel. See Installing wheels .