Carrier plate, replacing: Removal
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Preparatory work
Remove the transmission. See Transmission, removing .
Removing the carrier plate
Remove the engine speed (RPM) sensor with the bracket. Place it to one side.
Block the carrier plate using gear sector 9995112 .
Remove:
- all screws
- the carrier plate
- gear sector 9995112 .
Check the crankshaft seal for leakage.
To replace the crankshaft seal, refer to the car model and year.