Installing The Rear Wheel Hub

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying 4 Screws At Rear Wheel Hub

Courtesy of VOLVO CARS OF NORTH AMERICA.

Make sure that the wheel suspension is in its normal position.

Install:

the hub, attaching it to the wheel spindle and drive shaft.
Use new screws. Tighten. See Summary of tightening torques for specific components .

Remove the mobile jack.
the wheel sensor (M6). Tighten. See Tightening torque .