LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Hydraulic-Vacuum-Hydraulic Brakes - Removal, Replacement And Installation) >> Master Cylinder, Brake Booster (L. H. D; 1999-2006) >> Power brake booster, replacing >> Installation >> Install the brake pipes in the master cylinder and in the hydraulic modulator

Install the brake pipes in the master cylinder and in the hydraulic modulator

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Brake Pipe
GLL104478Courtesy of VOLVO CARS OF NORTH AMERICA.

Tighten to 17 Nm 

Install the integrated relay/fusebox and the connector for the ABS unit 

See Install the integrated relay/fusebox and ABS unit connector .

Install the air cleaner (ACL) housing 

See Install the air cleaner (ACL) housing .