Brake Fluid Reservoir, Replacing: Removal: Preparations

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Pedal Secured In Depressed Position Using Pedal Jack

Courtesy of VOLVO CARS OF NORTH AMERICA.

Switch off the ignition.

Clean around filler cap at the connector between the reservoir and master cylinder and at any hose connector. This is to ensure that no contaminants enter the brake system.

Place paper under the master cylinder. This is to protect the paintwork from damage if brake fluid is spilled.

Secure the pedal in the depressed position. Use a pedal jack.