Install the new brake pipe
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Tape the ends of the pipe before installing the new brake pipe.
Thread the brake pipe between the bodywork and the fuel lines.
Continue under the parking brake cable and over the muffler down to the other brake pipe.
Remove the masking tape.
Assemble the brake pipes. Tighten to 14 Nm .
Assemble the brake pipe and the brake hose in the bracket. Tighten to 18 Nm .