Install the bracket, mounting plate and brake pipe
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Install:
- the bracket in its mounting. Tighten to 25 Nm
- the screws and nuts for the mounting plate. Tighten to 25 Nm
- the brake pipe in its clips.
NOTE:
The brake pipe must not
be in contact with the car body. The brake hose must not
be twisted.