Install the brake hose

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For tightening torques, see Tightening torque .

Fig 1: Brake Pipe And Brake Caliper Hoses

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the brake hose to the caliper (1). Tighten. See Tightening torque .
brake pipe in the hose (2). Tighten. See Tightening torque .

Check the brake hose

Ensure that the brake hose is not twisted. If necessary alter the hose at the other end (brake pipe end).

NOTE: If the brake hose is twisted it may rub against the tire, rim or wheel arch. This could cause the circuit to fail.

Top up with brake fluid and bleed the braking system. See Brake system, bleeding (using bleeding unit) .

Install the wheel. See Installing wheels .