Install the brake pedal in the bracket
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Angle the screw upwards as much as possible.
Install the brake pedal on the screw. Turn so that the pedal and screw are between the brackets. The pedal should be positioned over stop lamp switch mounting and towards the dashboard lower edge.
Turn the pedal downwards past the stop lamp switch mounting. Do this before the screw is secured in the second bracket.
Install the nut on the screw. Apply a little locking fluid to the screw.
Tighten the nut. Tighten to 25 Nm .