Installing seat rail, right hand side

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Seat Rail, Two Screws And Seat Belt Buckle

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the seat rail
two plus two screws
the spring
the two screws
the seat belt buckle. See Installing the seat belt buckle
the seat. See Removing power seats, tilting

NOTE:

Removed seat rails must always be checked for movement. Use Vernier calipers to measure from the fixed to the moving component. Both rails should have the same measurement. If not, adjust one of the rails. If the rails do not have the same measurements the seat does not run parallel. This leads to increased wear and noise.