Installing the seat belt buckle

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Install:

the seat belt buckle
one screw
the wiring using the steel clip
the connector. See Installing the connector
the seat. See Removing power seats, tilting .

NOTE:

Check that the wiring is routed the same as the original wiring. Otherwise there is a risk of damage to the wiring.