Installation of wire for key lock (automatic transmission only)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Applies to cars with automatic transmission:
- Put the gear lever into position P.
- Set the ignition key in position I.
- Press in the wire in the ignition lock and feel to ensure that it is firmly fastened.
- Remove the ignition key and check that the gear lever is blocked in position P.