LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Steering - Removal, Replacement And Installation) >> Steering Wheel, Steering Wheel Lock, Steering Column, Shaft (2005-2006) >> Steering shaft, lower, replacing >> Installation >> Installing the needle bearing

Installing the needle bearing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Needle Bearing In Boot
GLL104671Courtesy of VOLVO CARS OF NORTH AMERICA.

Ensure that the needle bearing in the boot is in the groove. Lubricate the needle bearing in the boot with low temperature grease

NOTE: If necessary, make sure that the plain bearing is properly seated. Lubricate the plain bearing in the boot with low temperature grease, part no. 1161427-8 (6 grams).

Lubricate the edge on the inside of the inner part of the gaiter with soapy water.

scientia non olet · About LEMON Manuals