Installing the electric motor on the speed related power steering control valve during replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Electric Motor And Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install

the new electric motor
NOTE: Ensure that the engine management corresponds to the control valve control.
the three screws holding electric motor. Tighten to 3.5 Nm
the steering gear. See Replacing the steering gear .