Installing the outer steering arm

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Distance Between Lock Nut & Edge Of Wrench Grip

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the outer steering arm. Ensure that the markings and the measurements more or less correspond
the steering arm on the wheel spindle. Use a counterhold and tighten. For tightening torques, see Tightening torque .

Adjust so that the markings and measurement A correspond to the tightened lock nut.

Tighten the locknut. For tightening torques, see Tightening torque .

Install the wheels. See Installing wheels .