Internal pipe steering gear: Installation: Notes

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Sealing Rings On Oil Pipes

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the new sealing rings on the oil pipes. Lubricate the sealing rings.

Fig 2: Identifying Pipes With Sealing Rings

Courtesy of VOLVO CARS OF NORTH AMERICA.

Carefully install the new pipes with the sealing rings on the steering gear.

NOTE: Use a new screw for the holders for the pipes.

Tighten all pipe nuts to 7 Nm.

Tighten the screw to the holder. Tighten to 12 Nm.

Install the protective panel over the pipes.