Installing the inner steering arm

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Connecting Rods On Steering Arm From Steering Gear

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the inner tie rod.

Use thread sealant 1161053 .

Tighten. See Tightening torque .

Use tool 9997019 .

Remove the counterhold.

Clean the steering rack after removing the tool. Check the steering rack for damage.