Installing pulley, alternative 2

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Pulley Using A Screw With Correct Thread

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the screw on the pump shaft.
NOTE: Use a screw with the correct thread (M8 x 75 mm (M8 x 2.95 in)).
Install special tool 9995628 on the compression tool 9995575 .
Lubricate the pump shaft and install the pulley.
Install tool 9995628
on the pulley.
Hook on tool 9995628 on the pump shaft screw.

Fig 2: Pulley Measurements

Courtesy of VOLVO CARS OF NORTH AMERICA.

Press in the pulley to the listed measurement.
Install power steering pump according to Installing the power steering pump .