Filling with oil
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Study the fluid product information sheet before starting work.
Fill the servo reservoir with oil. Bleed the system
- Repeatedly turn the steering wheel to full lock. Top up the oil if necessary
- Lower the car
- Apply the parking brake. Start the engine
- A: Turn the steering wheel slowly to the right. Hold on full lock for 2 seconds
- B: Turn the steering wheel slowly to the left. Hold on full lock for 2 seconds
- Repeat steps A
and B
20 times.NOTE: Move the car after the operation has been carried out 10 times to avoid damage to the tires.