Install the steering gear / sub-frame components

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Fasteners For Steering Gear, Front Engine Pad, And Torque Rod Mounting

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

new lock nuts and screws on the steering gear. Tighten to 50 Nm
the screw for the front engine pad. Tighten to 50 Nm
new screws for the torque rod mounting. Tighten to 35 Nm and angle tighten +40° .

Press the power steering line into the holders on the sub-frame.