Install the nuts for the ball joint / control arm and anti-roll bar / link rod

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Ball Joint Nut

Courtesy of VOLVO CARS OF NORTH AMERICA.

The nuts for the ball joint and control arm: Counterhold with a Torx wrench so that the boot does not rotate. Tighten to 80 Nm .

The anti-roll bar and link rod: Use new nuts. Tighten to 50 Nm.