LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 220 (Automatic Transmission (Aw50/51 AWD And Aw55-50/51SN) - Removal And Installation) >> Transmission >> Wire harness, control system, replacing >> Installing the sub-frame and front suspension components >> Install the heated oxygen sensor (HO2S) bracket

Install the heated oxygen sensor (HO2S) bracket

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Heated Oxygen Sensor Power Supply Cable Bracket
GLL109346Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the cross member (applies only to right-hand drive cars) 

Ensure that the brake pipe is pressed into place in its holder.

Tighten the member. Tighten to 25 Nm  .

scientia non olet · About LEMON Manuals