Removing the screws from the torque converter
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Remove the 6 screws for the torque converter.
Turn the engine. Use a socket and ratchet. Pull out the right-hand fender liner slightly to access the crankshaft nut more easily.
Use a Torx TX 50 socket on the torque converter screws.