Installing the propeller shaft

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Front Propeller Shaft And Special Tool 999 7057

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the propeller shaft using the marking made earlier. Check carefully that the mating surfaces on the propeller shaft and flange are clean. Install the 6 x M8 screws with washers. Tighten. See: Tightening torque . Use: 9997057 .

Install the 2x M8 screws to the propeller shaft center bearing. Tighten.