Installing the bracket for the transmission end

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Bracket

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the bracket on the end of the transmission. Tighten
the screw for the upper bracket. Tighten.

Tighten the screws for the bracket in the cylinder block: 4 x M10 and 1 x M8.