Installing the anti-roll bar link to the spring strut
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Install:
- the anti-roll bar link to the spring strut. Use a new M12 nut. Counterhold using a Torx wrench so that the boot is not damaged
- the steering arm on the wheel spindle. Use a new nut. Tighten. See Tightening torque .