Installing and tightening the screws for the transmission

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Differential Housing Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install all 5 screws (apart from the screw for the bracket on the engine mounting) for the transmission / engine.

At the same time, check that the whole of the transmission is in contact with the engine.

Then tighten transmission / engine screws crosswise.

Remove the fixture from the transmission.

Install the 2 screws on the bracket at the cover for the differential housing.

Tighten.