Programming the transmission control module (TCM)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
After replacing the transmission the latest software must be programmed into the control module. See the technical journal for information about the most recent software.
Top up the oil level in the servo reservoir. Bleed the system. see Pressure pipe/hose, steering gear, replacement