Removing the upper torque rod
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Remove:
- the nuts for the cover panels over the shock absorbers
- the screw and nut at the torque control arm
- the screws for the mounting for the cross member.
NOTE:
Remove the upper nut at the exhaust flange. Remove the other two from underneath later on.