Installing the upper torque rod

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Air Cleaner Housing, Hoses And Electrical Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the torque rod. See Install the upper torque rod .
NOTE:
Use a new lock nut for the cross member mounting on the engine.
the air cleaner (ACL) housing with all hoses and electrical terminals.

Connect the battery lead

First read Battery, disconnecting .

Test driving

Check the coolant level and fill if necessary.