Installing the steering wheel shaft joint

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Screw For Joint Between Steering Gear And Steering Shaft

Courtesy of VOLVO CARS OF NORTH AMERICA.

Align the steering wheel shaft joint on the steering gear.

Fit a new steering wheel shaft screw. Tighten in accordance with: see Summary of tightening torques for specific components .

Connect the cable to the stepper motor/solenoid.

Check the position of the tie rod in the steering gear in accordance with see Measuring the position of the tie rod in the steering gear .