Installing the gear selector cables and oil line

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Gear Selector Cables And Oil Line

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the ground cable with bracket to the subframe
the oil pipe to the gearbox
the gear selector cables with the bracket, 2 x M8. Tighten.

Connect the cable to the lever. Connect the gearbox connector and the bracket to the air cleaner (ACL) housing bracket.

Press the cable harness bracket onto the control system cover.

CAUTION:

Check that the gearbox air bleed hose/valve is not trapped. Risk of overpressure in the gearbox.