Installing and tightening the screws to the gearbox

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Gearbox And Engine Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fit the screws, 7 x M10, to the gearbox/engine.

First tighten alternately and crosswise with light contact, while checking that the gearbox and engine are in contact all the way around.

Following which, tighten the screws with light contact crosswise to the gearbox/engine. Tighten.

Remove the fixture from the gearbox.