Install the inner section of the shaft

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Inner Section Of Shaft With Universal Joint

Courtesy of VOLVO CARS OF NORTH AMERICA.

Carefully install the inner section of the shaft with the universal joint according to the markings made previously. See Clean and mark up the constant velocity joint . Press the shaft sections together.

Position the shaft assembly horizontally.