Removing stub axle from the control arm

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Control Arm & Lever 999 7076

Courtesy of VOLVO CARS OF NORTH AMERICA.

Pry the control arm down. Use a lever 9997076 . At the same time, lift the stub axle off the control arm.

NOTE:

Install socket 9995562 on the stub axle ball joint. Do not damage the rubber bellows for the ball joint.