Pressing up the sub-frame on the right-hand side

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Sub-Frame And Bolts

Courtesy of VOLVO CARS OF NORTH AMERICA.

Press up the sub-frame on the right-hand side

Tighten the sub-frame screws to light contact. Then slacken off the screws approximately 4-5 turns.

NOTE:

This is because the sub-frame hangs down more on one side.

Move the mobile jack to the left hand side.