Install the screw for the front engine pad and the torque rod mounting in the sub-frame

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Gearbox Torque Rod Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the screw for the front engine pad. Tighten to 50 Nm
the torque rod mounting on the transmission.

NOTE:

Use new screws for the mounting. Tighten to 50 Nm .