Install the dip stick pipe and the ground lead on the transmission
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
Install the screw with the ground lead and the dip stick pipe in the transmission.
Use a new rubber seal. Apply petroleum jelly to the rubber seal. Tighten to 25 Nm .
NOTE:
Carefully check that the rubber seal is correctly positioned in the transmission. Failure to do so may result in leakage.