Miscellaneous, exceptions
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
The housings shown here have a divided cable terminal.
The cable terminals have no locking tab. The primary locking is located in the housing cavity on the cable side.
Use a feeler gauge approx. 0.15 mm.
Press in locking catch and extract the cable terminal.
- Proceed to chapter see New cable terminalSeal SWS and plug . Replacing a cable terminal in order to crimp a new cable terminal.