Cable terminals without locking tab

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Receptacle Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.

Single terminal housings without a locking tab such as receptacle terminals.

The terminal removal tool is inserted from the cable side.

Use terminal removal tool p/n 9814229 .

Fig 2: Identifying Terminal Removal Tool Inserted Under Cable Terminal From Cable Side

Courtesy of VOLVO CARS OF NORTH AMERICA.

Insert the terminal removal tool under the cable terminal from the cable side.

The point of the terminal removal tool pushes in and releases the primary locking (locking catch) in the housing cavity.

Fig 3: Identifying Cable Terminal And Terminal Removal Tool

Courtesy of VOLVO CARS OF NORTH AMERICA.

Withdraw the cable terminal and terminal removal tool at the same time.

Proceed to chapter see New cable terminal Seal SWS and plug . Replacing a cable terminal in order to crimp a new cable terminal.