Fuel, Injectors & Sensors - Removal & Installation

• Engine
  • Fuel Pump, Replacement
    • Notes
    • Safety
    • Emptying the Fuel System
    • Preparations
    • Disconnecting Connectors
    • Disconnecting Hoses
    • Removing the Fuel Pump Fitting
    • Mounting the Fuel Pump Fitting
    • Fitting the Hoses
  • Fuel Tank Pressure Sensor, Replacing
  • Fuel Tank, Replacing (ORVR)
    • Preparations
    • Disconnect the Connectors
    • Disconnecting Hoses
    • Remove the Fuel Filler Pipe
    • Remove the Fuel Tank
    • Remove Front Holders And Hoses
    • Disconnect Hoses
    • Removing the Fuel Filler Pipe
    • Transferring the Fuel Tank Pressure Sensor
    • Removing the Fuel Pump (FP)
    • Installing the Fuel Tank
    • Installing Fuel Pump (FP)/Level Sensor
    • Installing Nuts
    • Installing the Fuel Filler Pipe
    • Installing the Fuel Lines
    • Installing the Rubber Cover On the Fuel Filler Pipe
    • Fuel Tank, Replacing (Electronic EVAP)
      • Notes
      • Safety
      • Preparations
      • Disconnect the Connectors
      • Disconnecting Hoses
      • Remove the Fuel Filler Pipe
      • Remove the Fuel Tank
      • Remove Front Holders And Hoses
      • Disconnect Hoses
      • Removing the Fuel Filler Pipe
      • Removing the Fuel Pump (FP)
      • Installing the Fuel Tank
      • Installing Fuel Pump (FP)/Level Sensor
      • Installing Nuts
      • Installing the Fuel Filler Pipe
      • Installing the Fuel Lines
      • Installing the Rubber Cover On the Fuel Filler Pipe
  • Fuel Tank, Replacing
    • Notes
    • General Information About Fault-Tracing In the CAN Network
    • Handling Replaced SRS Airbags/Seat Belt Tensioners
      • Handling
      • Storage And Transport
  • Heated Oxygen Sensor (HO2S), Replacing (Others)
    • Notes
    • Heated Oxygen Sensor (HO2S), Replacing (B6xx4T)
      • Front Heated Oxygen Sensors (HO2S), Replacing
        • Removing Front Heated Oxygen Sensors (HO2S)
        • Installing Front Heated Oxygen Sensors (HO2S)
        • Finishing
      • Rear Heated Oxygen Sensor (HO2S), Replacing
        • Removing the Rear Heated Oxygen Sensor (HO2S)
        • Installing the Rear Heated Oxygen Sensor (HO2S)
  • Heated Oxygen Sensors (HO2S), Replacing (B6xx4x -2001)
    • Notes
    • Removal
    • Installation
    • Heated Oxygen Sensors (HO2S), Replacing (B6xx4T 2002-)
      • Notes
      • Replacing front heated oxygen sensors (HO2S)
        • Removing Front Heated Oxygen Sensors (HO2S)
        • Installing Front Heated Oxygen Sensors (HO2S)
        • Finishing
      • Replacing Rear Heated Oxygen Sensors (HO2S)
        • Removing Rear Heated Oxygen Sensors (HO2S)
        • Installing Rear Heated Oxygen Sensors (HO2S)
  • Example Of Use Of the Frozen Values
    • Example Of Use Of the Frozen Values
  • Information About Combined Diagnostic Trouble Codes (DTCs)
    • Overview
    • Notes
    • Injector/Pulsation Damper, Replacing (B6xx4T)
      • Removal
        • Preparation
        • Removing the Fuel Rail
        • Removing Injectors
      • Installation
        • Installing injectors
        • Finishing
  • Injector/Pulse Damper, Replacement (B5204T5; 2004-2007)
    • Preparation
    • Removing Injectors
    • Removing the Pulsation Damper
    • Installing Injectors
    • Installing the Pulsation Damper
    • Finishing
  • Injector/Pulse Damper, Replacement
    • Notes
    • Preparation
    • Removing Injectors And Pulsation Dampers
    • Installing Injectors And Pulsation Dampers
    • Installing the Pulsation Damper
    • Installing the Mounting Rail
    • Finishing
  • Injectors/Pulsation Dampers, Replacement (B5204T5; B5254T4)
    • Notes
    • Intake Manifold/Gasket, Replacing
      • Removal
        • Notes
        • Preparation
        • Removing the Intake Manifold And Gasket
      • Installation
        • Transferring Components When Replacing Intake Manifold
        • Installing Intake Manifold/Gasket
        • Finishing
    • Knock Sensor (KS), Replacing (B6xx4T)
      • Removal and Installation
        • Removing the Knock Sensor (KS)
        • Installing Knock Sensors (KS)
  • Knock Sensor (KS), Replacing (B5204T5; B5254T4)
    • Notes
    • Knock Sensor (KS), Replacing (B5xx4T)
      • Removal and Installation
        • Notes
        • Removing the Knock Sensor (KS)
        • Installing Knock Sensors (KS)
  • Knock Sensor (KS), Replacing (B5244S)
    • Notes
    • Knock Sensor (KS), Replacing (B5xx4T)
      • Removing the Knock Sensor (KS)
      • Installing Knock Sensors (KS)
    • Knock Sensor (KS), Replacing (B6xx4x)
      • Removing the Knock Sensor (KS)
      • Installing the knock sensors (KS)
  • Leak Diagnostic Pump, Replacing (B5204T5)
    • Notes
    • Leak Diagnostic Pump, Replacing
      • Notes
      • Preparation
      • Removing the Spare Wheel
      • Removing the Leak Diagnostic Pump
      • Installing the leak diagnostic pump
      • Installing the spare wheel
      • Finishing
  • Leak Diagnostic Pump, Replacing (B5234T3; B5244T3)
    • Notes
    • Leak Diagnostic Pump, Replacing
      • Information
      • Removing the Carbon Filter Container
      • Removing the Leak Diagnostic Pump
      • Installing the leak diagnostic pump
      • Installing the Carbon Filter Container
  • Mass Air Flow Sensor (MAF), Replacing
    • Removing the Mass Air Flow (MAF) Sensor
    • Installing the Mass Air Flow (MAF) Sensor
  • Misfire Diagnostic
  • Panel and SRS Passenger Airbag Module
    • Preparations
      • Ignition Off And Disconnect the Battery Negative Lead
    • Disassembly
      • Glove Compartment
      • SRS Ignition Cable
      • SRS-Airbag Screws
      • Ventilation And Loudspeaker Grilles
      • Panel Screws
      • SRS Airbag
    • Replacing Seals
      • Installing Seals On Dashboard Frame
      • Removing the Old Seals From the Panel
    • Installation
      • Assemble In Reverse Order
    • Completion
      • SRS Airbag Date Decal
      • Ignition In Position II. Reconnect the Battery Negative Lead
      • Check
  • Pedal Position Sensor Clutch, Replacing
    • Pedal Position Sensor, Clutch, Replacing (M56 1999-)
      • Removal
      • Installation
  • Pressure Regulator, Checking/Adjusting
    • Notes
    • Checking/Setting Turbo1 Pressure Regulator
      • Preparation
      • Connecting Test Equipment
      • Checking And Adjusting Push Rod
      • Finishing
    • Checking/Setting Turbo2 Pressure Regulator
      • Preparation
      • Connecting Test Equipment
      • Checking And Adjusting Push Rod
      • Finishing
      • Function Test
  • Ranking Values
  • Replacing Electronic Throttle Module (ETM)
    • Removing the Throttle Body
    • Installing the throttle body
    • Ordering software
    • Finishing
  • Replacing Fuel Pressure Regulator
    • Notes
    • Draining Fuel System
    • Preparations
    • Removing Return Line
    • Disconnecting Connectors
    • Removing Fuel Filler Pipe
    • Removing Fuel Line Rail
    • Removing Pressure Regulator
    • Removing Fuel Tank
    • Removing Front Bracket
    • Installing New Pressure Regulator
    • Installing Fuel Tank
    • Installing Pressure Regulator
    • Installing Fuel Filler Pipe
  • Replacing Fuel Tank Pressure Sensor
    • Notes
    • Preparations
    • Disconnect Connectors
    • Remove Fuel Filler Pipe
    • Remove Fuel Tank
    • Remove Front Holder
    • Replacing Fuel Tank Pressure Sensor
    • Installing Fuel Tank
    • Installing Rubber Cover On Fuel Filler Pipe
    • Replacing Heated Oxygen Sensors (HO2S) (B6xx4S 2002-)
      • Notes
      • Replacing Front Heated Oxygen Sensors (HO2S)
        • Removing Front Heated Oxygen Sensors (HO2S)
        • Installing Front Heated Oxygen Sensors (HO2S)
        • Finishing
      • Replacing Rear Heated Oxygen Sensors (HO2S)
        • Removing Rear Heated Oxygen Sensors (HO2S)
        • Installing Rear Heated Oxygen Sensors (HO2S)
    • Replacing Knock Sensor (KS) (B5xx4S)
      • Removing Knock Sensor (KS)
      • Installing knock sensor (KS)
    • Replacing Knock Sensors (KS) (B5xx4S/S2 1999-)
      • Notes
      • Removing the knock sensor (KS)
      • Installing knock sensors (KS)
  • Replacing Lambda Probes
    • Removal Of Lambda Probes
    • Installation Of Lambda Probes
  • Replacing Pressure Switch/Pressostat
    • Removing Pressure Switch/Pressostat
    • Installing Pressure Switch/Pressostat
  • Replacing Radiator/Charge Air Cooler (CAC)
    • Notes
    • Removing radiator assembly
    • Replacing Water Cooler/Charge Air Cooler (CAC)
    • Installing Cooler Unit
    • Installing Engine Coolant Fan (FC)
    • Fill Coolant
  • Replacing the Accelerator Pedal Module
    • Removing the Accelerator Pedal Module
    • Installing the Accelerator Pedal Module
    • Replacing the accelerator pedal module
      • Removing the accelerator pedal module
      • Installing the accelerator pedal module
  • Replacing the Camshaft Position Sensor (CMP)
  • Replacing the Camshaft Seals/Variable Valve Timing Unit
    • Removing the Front Camshaft Seal
      • Notes
      • Replacing the Rear Camshaft Seal
      • Preparation
      • Removing the Variable Valve Timing Unit/Timing Gear Pulley
      • Removing the Front Camshaft Seal
    • Installing the Front Camshaft Seal
      • Notes
      • Cleaning
      • Installing the Front Camshaft Seal
      • Checking the Variable Valve Timing (VVT) Unit
      • Finishing
      • Final Check
    • Removing/Installing the Rear Camshaft Seal
      • Preparation
      • Removing the Rear Camshaft Seal
      • Finishing
  • Replacing the Canister Purge (CP) Valve
    • Removing the Canister Purge (CP) Valve
    • Installing A New Canister Purge (CP) Valve
    • Installing the Canister Purge (CP) Valve
  • Replacing the Engine Control Module (ECM)
    • Notes
    • Points to Observe When Replacing the Control Module
    • Removing the Engine Control Module (ECM)
    • Installing the Engine Control Module (ECM)
    • Ordering software
    • Finishing
    • Replacing the EVAP Canister Shut-Off Valve
      • Removing the EVAP canister shut-off valve
      • Installing the EVAP Canister Shut-Off Valve
    • Replacing the Fuel Tank
      • Identification
  • Replacing the Mass Air Flow (MAF) Sensor
    • Removing the Mass Air Flow (MAF) Sensor
    • Installing the Mass Air Flow (MAF) Sensor
  • Replacing the Timing Belt
    • Notes
    • Removing the timing belt
      • Preparation
      • Removing the timing belt
    • Checking the Tensioner And Idler Pulleys
    • Installing the Tensioner/Damping Unit
    • Installing the timing belt
      • Notes
      • Tighten the timing belt and check
    • Finishing
    • Final Check
    • Replacing the timing belt
      • Notes
      • Removing the Timing Belt
        • Notes
        • Preparation
        • Removing the timing belt
      • Checking the Tensioner Pulley And Idler Pulley
      • Installing the timing belt
        • Notes
        • Tensioning the timing belt
        • Check
      • Finishing
      • Final Check
  • Replacing the Turbocharger (TC) Control Valve
    • Removing the turbocharger (TC) control valve
    • Installing the turbocharger (TC) control valve