LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2002 >> S60 Base, 2.4 61, Standard >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Axle, Drive Shafts - Removal, Replacement And Installation >> Drive Shaft, CV Joint (B5204T5, Aw55-50/51SN; 2004-2007) >> Boot, Half Shaft, Replacing >> Reassembly >> Install The New Boot / Boots On The Drive Shaft

Install The New Boot / Boots On The Drive Shaft

Fig 1: Installing New Gaiters On Drive Shaft
GLL109790Courtesy of VOLVO CARS OF NORTH AMERICA.

Install The Constant Velocity Joint On The Drive Shaft 

Ensure That Inner Ring Is Straight In The Constant Velocity Joint.

Tap On The Constant Velocity Joint. Use A Rubber Mallet.

Check That The Lock Ring Is Seated In Its Groove. Do This By Measuring The Distance. See check The Measurement .