Checking the Component

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Connecting Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off
• Reinstall the connectors, components etc.
• Ignition on.

  HINT: This fault-tracing does not apply to audio unit 8X1. If the car is equipped with an 8X1, select "Yes" to move to the next fault-tracing. 

  Separate the gray connectors (behind the head unit/audio unit) on the wiring from the loudspeakers and the loudspeaker wiring from the amplifier.

  Connect the wiring from the loudspeakers to the head unit/audio unit connector B.

  Check that the sound is OK from all loudspeakers.

Is the sound OK? 

• YES 

  Refer to Checking the Component And Cable 

• NO 

  Refer to Checking the Cable