Checking CD-ROM player function

Fig 1: Identifying Ignition On Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition on.
• Insert a CD-ROM disc with map information into the CD-ROM player.
• Use System test function to test if the CD-ROM player is correctly connected. For more information about the System test, see System Test . The test can take up to approximately 1.5 minutes at longest.

  Check by testing if the CD-ROM player is connected or not.

  Fig 2: Identifying VCT2000

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Is the CD-ROM player correctly connected? 

• YES 

  Refer to Intermittent fault 

• NO 

  Refer to Checking contact resistance and oxidation