LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2023 >> ID.4 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Exterior Equipment) >> 66 Exterior Equipment >> Moldings, Trims, Extensions And Trim Panels >> Trim Molding, Removing And Installing >> Trim Molding On Rear Lid, Removing And Installing >> Installing

Trim Molding On Rear Lid, Removing And Installing: Installing

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

-- Follow the assembly instructions. Refer to Assembly Instructions .

-- Align the trim molding -1- with the centering mounts out of the rear lid -2-.

-- Remove the protective film from the adhesive tape -3- using the removal aids -4-.

-- Press on the trim molding -1- firmly in the area of the adhesive tapes -3-.

scientia non olet · About LEMON Manuals