EVAP Canister, Removing And Installing, Vehicles Without Fuel Tank Leak Detection: Removing

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the right rear wheel. Refer to the appropriate Service Information .

-- Remove the right rear wheel housing liner. Refer to OVERVIEW - REAR WHEEL HOUSING LINER .

-- Remove the breather lines -1 and 2- from the EVAP canister. Disconnect the connector couplings. Refer to CONNECTOR COUPLINGS, DISCONNECTING .

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Unclip the breather line from bracket -arrows-.

-- Remove the bolt -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Press in the hook -3- using a screwdriver.

-- Remove the EVAP canister -2- downward from the bracket in direction of -arrow-.